TP-Link MC210CS Converter 1000 mbps Ethernet Optics (single-mode)

TP-Link MC210CS

Media converter designed to convert media from optical line 1000Base-LX/LH to metallic line 1000Base-T and vice versa. The MC210CS media converter, which was designed according to IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-LX/LH standards, is intended for use with singlemode optical cable with SC type connector. The MC210CS media converter supports the Long Wave Laser (LX) specification at maximum packet forwarding speed. It uses a wavelength of 1310 nm for receiving and sending data. Other features of this module include the ability to be used as a stand-alone device (no chassis required), MDI/MDI-X auto-detection for the TX port, and front panel status LEDs. The MC210CS module supports data transmission using a singlemode optical cable at a distance of up to 15 km.

• Supports 1000 Mbit/s speed in full duplex mode
• Complies with IEEE 802.3ab and IEEE 802.3z standards.
• Enables automatic configuration of forced/automatic transfer mode for FX port.
• Extends the range of the optical line up to 15 km.

The media converter only supports gigabit ethernet. It does not support 10/100 Mbps speeds

Ports

• 1x 1000 Mbps RJ-45
• 1x 1000 Mbps SC/UPC

Wavelength: 1310 nm (Single Mode)

Standards IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z

Maximum consumption: 1.8 W

Dimensions: 94.5 x 73 x 27 mm