XtendLan POE extender 2x PoE per one UTP cable 100Mb

XtendLan POE-PAS-D

The multifunctional RJ-45 splitter/extender can connect two PoE inputs (2× 25 W - 802.3at) and thus double the power supply, or transfer data from two Ethernet inputs using one cable.

Use as uPoE

• Use with an injector to double the power of a single device from 25W to 50W - combines two 802.3at ports into one uPoE port.
• Supports gigabit data rates and up to 50W transmission on Cat6 cable.

Use as an Ethernet doubler

• Used to connect two 10/100 Mbps Ethernet ports to one long Ethernet cable with or without PoE.
• Supports 2 separate connections with 10/100 Mbps data rate and up to 25W for each (total 50W) on CAT5e cable.
• Connect two RJ-45 connectors to the switch, then on the other side, connect each RJ-45 connector to a camera, Wi-Fi access point, or IP phone.
• Use any Cat5e cable between the two devices.

Power supply

• 5/12/24/48V
• using a PoE switch or injector

Input voltage: 57 V max

Transmission distance: 30-40 m

Connectors

• 1x RJ-45 (F)
• 2x RJ-45 (M)

Material: plastic

Length of cables: 12.5 cm

Weight: 57 g

Number of pcs in the package: 2