Planet FSD-1008HP PoE switch 10x 100Mb 8xPoE 802.3at 30W 120W VLAN extend mode 10Mb with up to 250m fanless

PLANET FSD-1008HP

10-port PoE switch 10/100Base-TX, including 8x Power over Ethernet injectors (power supplies) of the IEEE 802.3at standard, total power up to 120W. Extend mode for connection at a speed of 10 Mb/s up to a distance of 150-200 m on UTP depending on the line used, including PoE power supply. Port VLAN on PoE ports. EEE Ethernet IEEE 802.3az. Automatic detection of 10/100Mbps and cable crossing. No fans, internal AC 230V power supply.

Unmanaged switch suitable for CCTV IP camera systems. It has small dimensions, low power consumption and the ability to further power Power over Ethernet end devices according to the IEEE 802.3at standard. It allows connecting and powering Ethernet devices at a speed of 10 Mb/s up to a distance of 250 m on classic UTP cabling, individual ports with PoE power can be operationally separated by port VLANs. 250m is the theoretical maximum depending on the quality of the cabling and connectors, in normal conditions the real distance is 150m. According to our tests, the real distance on a quality Cat 6 cable is 200 meters, on a Cat 5e cable 150 meters +- 10%.

Physical properties

Ports: 10 x RJ-45 10/100BASE-T

Memory

• 8k MAC addresses
• frame length up to 1522B

Throughput

• 2 Gbps bus
• operational 1.48 Mpps (64b)

Design: rackmount 1U

Power supply

• internal power source 100-240V/50-60Hz AC
• total power consumption up to 129 W

Protection

• ESD up to 4kV contact
• up to 6kV by air

Operating temperature: 0 to 50°C

Dimensions: 220 x 150 x 43 mm

Weight: 1230 g

POE function

Total power output

• 120 W
• IEEE 802.3af
• IEEE 802.3a

Number of injectors: 8 x up to 30.8 W

Power type: End-span

Advanced features

• automatic detection of powered equipment
• Extended mode 10Mb/s with a range of up to 200m