Planet FGSD-1011HP PoE switch 8x 10 100 PoE 1x TP + 1x SFP 1000Base-X extend mode 10Mb ESD 802.3at 120W fanless

PLANET FGSD-1011HP

PoE switch with a power of 120 W, 8x 10/100Base-TX with the possibility of powering other IEEE 802.3at devices, two uplink 1000Base-X ports 1x TP and 1x SFP. DIP switches for setting, port VLAN, Extend mode for connection up to 250 m including PoE at 10 Mb/s. ESD protection against overvoltage and electrostatics. Internal power supply AC 100~240 V, without fans.

10-port PoE switch, thanks to 8 PoE ports, it allows you to power other devices such as IP cameras, VoIP phones and desktop switches, when switched to Extend mode, this is possible at a speed of 10 Mb/s up to a distance of 250 m (connection length depends on the used UTP line, connectors and execution; practical experience of connection <200m).

Ports

• 8x RJ-45 10/100Base-TX
• 1x RJ-45 10/100/1000BASE-T
• 1x SFP 100/1000BASE-X
• 1x RJ-45 serial console port

Memory: 4k MAC addresses

Throughput

• 5.6 Gbps bus
• operational 4.16 Mpps (64b)

Transfer Support: JumboFrame 9KB

IP protocol version

• IPv4
• IPv6

Design: desktop

Power supply

• source 100-240 V/50-60 Hz AC
• total power consumption up to 135 W

Protection: ESD against electrostatic electricity up to 8 kV

Operating temperature: 0 to 50 °C

Dimensions: 220 x 150 x 44 mm

Weight: 1220 g

POE function

Total power output

• 120 W
• IEEE 802.3af
• IEEE 802.3a

Number of injectors: 8x to 30 W

Power type: End-span

Advanced features

• Extended mode 10 Mb/s with a range of up to 200 m