Ubiquiti PowerBeam M2 400 - AP client 2.4GHz antenna 18dBi MIMO airMAX 1x RJ-45 PoE 24V

Ubiquiti PowerBeam M2 400

The PowerBeam (PBE-M2-400) is a high performance complete outdoor unit including a 18 dBi MIMO 2x2 antenna for the 2.4 GHz band. It is suitable as a client unit or PtP connection. The unit supports throughput up to 150 Mbps.

PowerBeam 400 uses a new antenna design for greater resistance to interference, has a better design for easy installation. The material of the unit uses GEOMET technology for high corrosion resistance. For high transfer rates, the unit uses the 802.11n standard and AirMAX (TDMA) technology to achieve low latencies.

The antenna system consists of two antennas with horizontal and vertical polarization, which use the patented InnerFeed technology to achieve the best characteristics while maintaining a good price. A big advantage is ESD/EMP protection against overvoltage on both wireless and Ethernet parts up to 24 kV!

Web administration is very simple and clear. You can set e.g.:

• AP, Client or WDS mode
• Traffic shaping
• QoS
• Transparent bridge or routing between WAN and LAN, without NAT or with NAT
• Signal strength (what the specific signaling LED should correspond to)
• Output power up to 28 dBi

In bridge and WDS mode, the device transparently supports IPv6 transmissions.

The package also includes a 24 V/0.5 A PoE power source.

Wi-Fi standard: 802.11g/n + airMA

Antenna: 18 dBi

Ports: 1x 10/100 Ethernet port

Frequency band: 2405 - 2475 MHz

PoE support: yes

Dimensions: 420 x 420 x 289 mm