Solarmi AC25 fitted switchboard for photovoltaics circuit breaker protector 10kW 3f full automatic backup 25A

Xtend Solarmi AC25 fitted switchboard

AC switchgear designed for wall mounting, protection class I+II, IP65 used to operate a three-phase photovoltaic power plant (typically a Goodwe 4 to 10K-ET inverter)

Its advantage is the automatic switching between standard operation from the network and backup. It is necessary to control the load during a power failure to avoid overloading, as its function switches the whole house to inverter backup.

An indisputable advantage is minimal intervention in the customer's switchboard - the Smartmeter (inverter measurement), common breakdown point and all fuses are part of this switchboard. It is enough to make a loop between hl. switchgear and technology placement. Smartmeter is not included in the delivery.

The switchboard is also equipped with emergency disconnection of the HDO inverter (N0%) and preparation for the installation of the FIRE-SAFETY solution. The GW25 type is designed for the main circuit breaker in the 25 A column.

There is a slight time delay during switching (switching of contactors). So it is not a fail-safe backup solution.

• Meets the standard/requirements according to ČSN EN IEC 61439-3 and 61439-1 edition 2
• Compact distribution board, indoor use, IP65, IKA series
• Including N/PE terminal block
• Professional design (ABS + polycarbonate door)
• 3 rows, 54 modules, DIN rails

List of components

• 1× Switchboard ON plaster IP65, transparent door, 3 rows, 54 modules (EATON IKA-3/54-ST)
• 1× Surge arrester class T1+T2 (B+C), 4-pole set for TN-S (EATON SPBT12-280/4)
• 1× Main switch, 240V, 40 A, 3HP (EATON IS-40/3)
• 2× Circuit breaker PL6, characteristic B, 1-pole, Icn=6kA, In=6A (EATON PL6-B6/1)
• 1× Circuit breaker PL6, characteristic B, 1-pole, Icn=6kA, In=16A (EATON PL6-B16/1)
• 1× Monitoring voltage relay (ELKO EP HRN-55)
• 1× Relay 1NC, 1NO (FINDER 2P/8A 230VAC 40.52.8.230.0000)
• 1× Installation contactor, 230VAC/50Hz, 1S, 1R, 25A (EATON Z-SCH230/1/25-11)
• 2× Installation contactor, 230VAC/50Hz, 4S, 25A (EATON Z-SCH230/25-40)
• 1× Installation contactor, 230VAC/50Hz, 4S, 40A (EATON Z-SCH-230/40-40)
• 1× Circuit breaker PL6, characteristic B, 3-pole, Icn=6kA, In=6A (EATON PL6-B6/3)
• 1× Circuit breaker PL6, characteristic B, 3-pole, Icn=6kA, In=16A (EATON PL6-B16/3)
• 1× Circuit breaker PL6, characteristic B, 1-pole, Icn=6kA, In=2A (EATON PL6-B2/1)
• 2× Circuit breaker PL6, characteristic B, 3-pole, Icn=6kA, In=20A (EATON PL6-B20/3)

Intended use: for photovoltaics

Employed: yes

Material: plastic

Weight: 9.2 kg

Dimensions: 586 x 418 x 148 mm