Ubiquiti NanoBeam M5 16 - AP client 5GHz antenna 16dBi MIMO2x2 airMAX 1x RJ45 PoE 24V

Ubiquiti NanoBeam M5 16 dBi

NanoBeam (NBE-M5-16) is a powerful complete outdoor unit including 16 dBi MIMO 2x2 antenna for 5 GHz band suitable for Point-to-Point and Point-to-Multipoint connections. The unit enables communication at up to 150 Mbps.

The antenna system consists of two 16 dBi antennas with horizontal and vertical polarization. For high transfer rates, the unit uses the 802.11a/n standard and AirMAX (TDMA) technology to achieve low latencies.

Web administration is very simple and clear. You can set e.g.:

• AP, client or WDS mode
• traffic shaping
• QoS
• transparent bridge or routing between WAN and LAN, without NAT or with NAT
• signal strength, which should correspond to a specific signaling LED
• output power up to 26 dBm

In bridge and WDS mode, the device transparently supports IPv6 transmissions.

The advantage of NanoBeam is the spirit level and the innovative hinged holder, thanks to which it is possible to rotate the antenna to the desired position and aim precisely.

A 24 V PoE power adapter is included in the package.

Wi-Fi standard: IEEE 802.11a/n

CPU frequency: 560 MH

Number of cores: 1

RAM memory: 64 M

Ports: 1 x RJ-45

PoE support: yes

Frequency band: 5150 - 5875 MHz

Antenna: 16 dBi

Dimensions: 140 x 140 x 54 mm

Weight: 320 g