TINYCONTROL expansion module with 1wire I2C and OLED display for LAN controller v3

Tinycontrol module for LAN controller v3

Expansion module with 1wire, I2C and 0.92" OLED display (separate product) for LAN controller v3

The board has spring clamps for convenient connection of DS18B20 sensors (wire cross-section 0.5 mm2) and a micro JST 1.25 mm connector for the I2C bus (e.g. for connecting a BME280 sensor). Communication with LAN controller via I2C or 1-Wire bus. For this, the board should be connected to the INP6 connector in the LAN controller using a 6-wire cable with an RJ-12 plug, the other socket can be used to connect another 1-wire or I2C sensor. There is a label on the board for connecting DS18B20 sensors to the 1-Wire bus.

Properties

• the display module is easy to install and replace
• support for communication with Lan Controller v3 (I2C bus)
• optional DIN mounting
• the second connector can be used to connect other sensors

Interface

• 2x RJ-12 (I2C/1-Wire)
• 1× I2C micro (1.25 mm)
• 3x 3pin connector
• 1× 4pin connector for the display

Power supply: from the bus

Dimensions: 66 × 36 × 18 m

The display is not included in the package! You can find it in the related goods under the code NJSGWL0032.