TINYCONTROL current sensor up to 35A for LAN controller

Tinycontrol current sensor up to 35 A

Non-invasive current sensor (WCS6800) for measuring DC current by indirect method. It is intended for LAN driver v3/3.5/3.6.

• In the case of using Lan Controller v3, the sensor should be powered by 3.3 V from the IDC10-1 connector and use the INP1-4A input.
• In the case of using Lan Controller v3.5/3.6, the sensor should be powered with 3.3 V from the IDC10-1 connector and use the INP3-4A input, or more simply use 5 V and measure at the INP1-2A input.
• The indications/pointers should be calibrated in the Cal window before use!

TECHNICAL SPECIFICATIONS

Current Range: 0-35

Maximum diameter of measured conductor: 9 mm

Sensitivity: 66 mV/A

Insulation voltage: 4000 V

Supply voltage (from LAN controller): 3.3V or 5V

Length of connection cable: 50 cm