Planet IFT-805AT optical converter SFP DIN IP30 -40 to 75 degrees C

Planet IFT-805AT

100Base-TX /100base-FX optical converter for industrial applications with built-in switch. Optical port with SFP connector. Redundant power supply, IP30 protection, aluminum housing, operating temperature -40 to 75 degrees. C. Mounting on a DIN rail or directly on the wall. Alarm switch in case of connection failure.

The IFT-80xT series of industrial converters expands the possibilities of applying Ethernet via optical lines in the demanding environment of factory operations, production halls or outdoor installations on roofs and attics. The converters are robust and resistant to a wide range of ambient temperatures, shocks, surges and mechanical damage. The casing is made with an IP30 protection degree, they can be easily installed on a DIN rail or directly on the wall, the power supply is redundant in the range of 12 to 48V DC.

Ports

• 1 x RJ-45 10/100Base-TX
• 1 x SFP 100Base-FX

Transmission support: Frame 1522 B

Design

• DIN rail
• wall-mounted

OAM support: no

Power

• 24-48V DC redundant power supply
• connection possible from two different sources (not included in the package)
• total power consumption up to 3W

Protection

• ESD up to 6KV DC
• EFT up to 6KV DC
• reverse polarity protection
• power connection on the terminal block
• location on the bottom panel (does not interfere with wall mounting)

Operating temperature: -40 to 75°C

Dimensions: 135 x 85 x 32 mm

Weight: 430 g

Can be installed in chassis: no

Industrial properties

• the device is resistant to falling (IEC-60068-2-32) from a height of 75 cm on all impact parts
• the device is resistant to vibration (IEC-60068-2-6)
• the device is resistant to overload short-term acceleration 50g, long-term 4g, (IEC-60068-2-27)
• electrical safety according to CE EN-60950

EMC Electronic compatibility (EMI)

ČSN EN 55032:2015+AC 2016 - Electromagnetic compatibility of multimedia equipment

EMC immunity requirements (EMS)

• ČSN EN 55024 A1:2015 - Information technology equipment
• ČSN EN 55035:2017 - Electromagnetic compatibility of multimedia equipment
• ČSN EN 61000-4-2:2008 - Electrostatic discharge ESD
• ČSN EN 61000-4-3 A2:2010 - Radiated radio-frequency electromagnetic fields
• ČSN EN 61000-4-4:2012 - Electrical fast transients/bursts EFT
• ČSN EN 61000-4-5:2014 - Surge and overvoltage
• ČSN EN 61000-4-6:2013 - Immunity to conducted disturbances induced by radio-frequency fields
• ČSN EN 61000-4-8:2009 - Power frequency magnetic fields
• ČSN EN 61000-4-11:2004 - Voltage dips, short interruptions and slow voltage changes