MikroTik managed Switch UPS netPower Lite 8P 8x GbE PoE+ 2x 10Gb SFP+ SwOS PSU (PoE budget 120W)

MikroTik CSS610-8P-2S+OUT

Compact PoE switch with integrated UPS and smart battery charger for continuous operation of CCTV cameras and access points

Robust network switch with eight Gigabit Ethernet ports supporting 802.3af/at PoE-Out and two 10G SFP+ uplinks for high-speed connections. The device is equipped with an advanced UPS system with automatic switching and an intelligent battery charger that ensures continuous power supply to PoE devices even during power outages.

The switch supports a wide range of external batteries including flooded, AGM, gel and LiFePO4 types with BMS. Charging is intelligent in three stages (Bulk, Absorption, Float) with automatic temperature compensation. The IP55 certified housing and the extreme operating range -40 to +70 °C predetermine the device for demanding outdoor installations.

• 8× Gigabit Ethernet ports with 802.3af/at PoE-Out and a total power of 120 W
• 2× 10G SFP+ uplinks for high-speed backhaul connections
• Integrated UPS system with automatic switching in case of power failure
• Smart battery charger with support for flooded, AGM, gel and LiFePO4 types (0.2-1.6 A, 20-31.7 V)
• Automatic PoE prioritization at limited power consumption - charging slows down first
• Temperature sensor for charging optimization and battery protection
• IP55 dust and splash-proof housing with an operating range of -40 to +70 °C
• Flexible power supply 24-57 V DC via 2-pin terminal
• Alarm input for tamper detection with reporting via SwOS and SNMP

Intelligent power management

The switch can supply high-voltage PoE even from low-voltage DC sources. When power is limited, PoE devices are automatically prioritized - battery charging is slowed down to keep critical devices online. The total power consumption of the switch can reach up to 181 W.

Three-stage battery charging

The charger operates in three modes: Bulk (fast charging), Absorption (steady charging) and Float (maintenance voltage). The temperature sensor automatically adjusts the voltage for lead-acid batteries and blocks charging at temperatures outside the safe range, thereby extending the battery life.

Safety notice

An external BMS system with overcharge/discharge protection and temperature protection is required for LiFePO4 batteries. Lead-acid batteries require ventilation due to the release of hydrogen during charging. The negative terminal of the battery must not be connected to ground potential - it is used for current measurement and charger feedback.

Typical Applications

Ideal for WISP networks, CCTV systems, apartment buildings, utility networks and smart-city installations. Allows powering cameras and wireless backhaul from a single switch with UPS functionality without downtime.

Package Contents

Metal clamp, mounting kit, temperature sensor.

Switch chip: 88E6193

Memory: 64 MB Flash

Ethernet ports: 8× Gigabit Ethernet

SFP+ ports: 2× 10G SFP+

PoE

• 802.3af/at on Ether1-Ether8 ports
• max. budget 120 W

PoE current limit

• 1000 mA (low voltage)
• 640 mA (high voltage)

Power supply: 24-57 V DC (3× 2-pin terminal)

Battery charger

• 0.2-1.6 A
• 20-31.7 V

Supported batteries

• flooded
• AGM
• gel
• LiFePO4 (with BMS)

Consumption

• 7 W (no load)

max. 181 W

Operating system: SwOS Lite

Protection: IP55

Operating temperature: -40 to +70 °C

Dimensions: 303 × 212 × 78 mm