Geti GCA004 12 V Pb AGM and LiFePO4 battery charger 7 A for batteries 4-140 Ah

Xtend Solarmi GETI GCA004

Intelligent automatic charger for 12V lead and lithium iron phosphate batteries with a capacity of 4 to 140 Ah

The GETI GCA004 charger is a processor-controlled device designed for charging various types of 12V batteries including AGM, GEL, SLA, EFB, WET, DEEP CYCLE, calcium and LiFePO4 batteries. It automatically diagnoses the condition of the connected battery, selects the optimal charging voltage and starts charging with a maximum current of 7 A. After charging is complete, it switches to maintenance mode, which prevents damage from overcharging and keeps the battery in a charged state.

The charger offers 4 operating modes for different battery types and applications. CAR mode is designed for standard car batteries, AGM mode for AGM and LiFePO4 batteries with a current of up to 7 A, moto mode for smaller motorcycle batteries with a current of 1.5 A and repair mode for regeneration of damaged batteries. The large LCD display provides clear information on the charging status, voltage, current and other parameters.

• Processor control with automatic detection of battery type and condition
• 4 operating modes for different battery types: CAR, AGM, MOTO and repair mode
• Suitable for batteries with a capacity of 4 to 140 Ah with a maximum charging current of 7 A
• Automatic termination of charging and transition to maintenance mode against overcharging
• Comprehensive protection against short circuit, overload, reverse polarity and overheating
• Large and bright LCD display showing voltage, current and charging status
• Universal input voltage 100-240 V AC for use worldwide
• Compact dimensions 158 × 85 × 63 mm and weight only 440 g

Wide range of applications

The charger is suitable for charging batteries in cars, motorcycles, boats, backup power sources or snowmobiles. Thanks to the repair mode, it can restore the capacity of older or damaged batteries.

Intuitive control

The control panel allows easy selection of charging mode and connecting the battery using the supplied alligator clips is very simple. The LCD display provides an overview of all important parameters during charging.

Package contents

Charger, charging cable with clamps.

Input voltage

• 100-240 V AC
• 50/60 Hz
• 90 W

Input current: 0.4 A / 230 V AC

Output voltage: 12 V DC

Charging voltage

• 14.6 V
• 14.8 V

Charging current: max. 7 A

Suitable battery capacity: 4-140 Ah (12 V)

Battery types

• AGM
• GEL
• SLA
• EFB
• WET
• DEEP CYCLE
• calcium
• LiFePO4

Operating modes

• CAR
• AGM
• MOTO
• repair mode

Cooling: fan

Protection: IP20

Dimensions: 158 × 85 × 63 mm

Weight: 440 g