Skip to content
ropere

XtendLan Surge protector UTP line ground wire 100 1000Mbit protects two pairs

XTENDLAN Consumer | SP11UTP3 | 8592457286530

On stock 16 pcs.

Price of goods is 12,83 €.

Price without tax is 10,60 €.

VAT rate for CZE 🇨🇿 is 21%.

Weight of goods is 0.09 Kg.

Actual in cart 0 pcs.

Product was added to your cart. Basket

XtendLan Surge Protector for UTP Lines — Protection for Network Devices

Transient surge events, such as lightning or power grid problems, can seriously damage sensitive network devices. XtendLan Surge Protector for UTP Lines provides reliable protection for network infrastructure by supporting transmission speeds up to 10/100/1000 Mbps and the ability to protect two pairs of wires (1, 2 and 3, 6). The device with ground wire effectively dissipates surges to the ground and, thanks to its compact aluminum housing, is easy to install in various environments.

Multi-level protection and high reliability

XtendLan Surge Protector offers robust multi-level surge protection. The maximum discharge current reaches up to 2 kA between conductors and PE and 0.3 kA on protected conductor pairs (measured at 8/20 µs), which ensures the safety of the connected equipment even during sudden surge peaks. The low impulse limiting voltage below 20 V and the response time of less than 1 ns guarantee immediate protection.

Design and easy installation

Thanks to the durable and compact aluminum housing with dimensions 85 × 25 × 25 mm and a weight of 80 g, the device is suitable for installation in switchboards, outdoor cabinets or directly at the equipment. Precise marking and the presence of a grounding conductor make installation easier, saving time and costs.

Technical parameters

  • Ports: 2× RJ-45
  • Rated operating voltage: 48 V
  • Maximum voltage: 56 V
  • Maximum discharge current: 0.3 kA (pairs 1, 2 and 3, 6); 2 kA (between conductors and PE)
  • Impulse limiting voltage: <20 V (pairs 1, 2 and 3, 6)
  • Response time: ≤1 ns
  • Insertion loss: ≤0.5 dB
  • Standing wave ratio: ≤1.2
  • Transmission rate: 10/100/1000 Mbps
  • Insulation resistance: ≥0.4 MΩ
  • Operating temperature: -20 to +55 °C
  • Storage temperature: -40 to +70 °C
  • MTBF (mean time between failures): >30,000 hours
  • Certification: IEC61643-21:2000

This product is the ideal choice for professionals looking for effective protection of their network infrastructure against outages caused by surges.

Properties

NameValue
Colorblack
Dimension [mm]85 × 25 × 25 mm
PoE port count2
Outdoor useNo
Port speed1 Gb/s
Designfreestanding
Weight, brutto [g]80
Routing typeUTP cable