XtendLan PCI-E network card 2x 10Gbps SFP+ Intel X710 PCI-E x8

XtendLan XL-ENW-9832

10Gigabit network adapter with two SFP+ slots for module installation, PCI Express x8 v 3.0. Supports VMDq, SR-IOV, FCoE encapsulation, IEEE802.1AE, IEEE1588, DDIO. Support also in Mikrotik OS. Does not require original Intel SFP+ modules, any can be used. Supplied including a panel for low profile and standard mounting.

10Gigabit adapter installable into PCI Express x8 v 3.0 allowing immediate implementation of 10Gbps and 40Gbps transmissions. Used for installation in servers with a requirement for maximum availability and the ability to fully service clients in the network or the Internet. The PCI Express interface provides higher throughput compared to the original PCI bus, the technology allows using the full potential of 10Gigabit.

Features

• Can be used with e.g. XL-MTB-LR, XL-MTB-SR modules
• Load-balancing support for multi-CPU systems
• iSCSI support, remote boot
• VMDq support
• Fiber CHannel over Ethernet, FCoE support
• Time Sync support according to IEEE 1588, 802.1as
• Flow control support (IEEE802.3x); IEEE 802.1p CoS
• Support Virtual LAN (VLAN) tag detection and processing (802.1Q)
• Support prioritization (802.1D, 802.1p)
• Hardware acceleration of TCP/IP protocol, TCP/UDP checksum
• Support 16K Jumbo Frame
• Support SNMP RMON
• Advanced software connection methods - Adapter fault tolerant (AFT), Siwtch fault tolerant (SFT), Adaptive load balancing (ALB)

Interface: PCI-E 3.0 x8 (can also be installed in PCIe x16)

Chipset: Intel XL710-AM2

Speed: 10 Gbps

Ports: 2 x SFP+

Power consumption: 10 - 11 W

Operating temperature: 0°C - 55°C

Dimensions: 148 x 68 mm

Supported Environments

Microsoft Server 2008/ 2012 Linux 2.6.32 and 3.x and higher (from RHEL 6.5, SLES 11 SP3) FreeBSD 9