Xtend Home PIR motion sensor for alarm system

Xtend Home motion sensor

Wireless infrapassive motion detector with pet resistance up to 15 kg. It operates at a frequency of 433 MHz. The detector is powered by 2× AA batteries. Install the sensor 2 to 2.2 m above the ground.

Adding to the control panel is done via the control panel menu. Click on the icon on the transmitter screen and enter the code 1234. Select the type of accessory and follow the instructions. Remove the cover and set the isolated dip switch to ON and turn on the device. Pairing is done by movement afterwards.

• PIR motion sensor
• Anti-damper contact
• Immunity to animals up to 15 kg (pet immunity)
• Recommended installation height 2.0 to 2.2 m
• DIP switches - LED light ON/OFF, detection switching 5 s or 5 minutes
• Consumption up to 10 uA (standby), up to 15 mA (alarm)
• Operating temperature -10 to + 50 °C

The package includes a bracket for wall mounting, 2× dowels and 2× screws.

Detector type: PIR + pet immunity up to 15 kg

Range

• 6 m (110° horizontal range
• 79° to 87° vertical)

Pet immunity

• yes
• up to 15 kg

Transmission frequency

• 433 MHz (eV1527)
• range up to 100 m

Power supply: 2× AA batteries (1.5 V)