Victron EV charging station for electric cars 22kW 32A 3f 1f Type 2 LCD display without cable

Victron EV charging station LCD 22 kW

The high-performance EV charging station provides a maximum of 22 kW AC in three-phase mode or 7.3 kW in single-phase mode.

Wi-Fi communication 802.11b/g/n for configuration and monitoring

The internal Wi-Fi module can be configured in access point mode or station mode for both initial setup and monitoring.

LCD touch screen

It has a 4.3" touch LCD display for monitoring and control.

Light ring for quick display of device status

Fully programmable RGB light ring around the charging port for quick indication of device status. From the web interface, it can be programmed to display different light effects according to the current state (unplugged, charging, charged, etc.). The goal is to help the user see the current status from a distance.

Two working modes

Manual mode allows you to configure the output current between 6-32 A. The charging performance is controlled in two ways: using the slider on the touch LCD display, or using the web page. Allows you to manually start or stop the charging process when the vehicle is connected to the charging station.

Automatic mode to ensure maximum efficiency of the PV system

It detects when excess power is available and uses only that power to charge the vehicle.

Integration with GX devices

The EV charging station can be configured and monitored from the GX on-screen device and remote console.

Integration with VRM

Several options are available in the VRM portal: real-time reports, custom reports for configurable time periods, or advanced features such as remote firmware updates.

Rated power: 22 hp

Input Voltage: AC 170-265V

Rated charging current: 32 A per phase

Output current range: 6-32 A

Connector: IEC 62196 Type 2

Wi-Fi standards: 802.11b/g/n (2.4GHz only)

Power terminals: 6-10 mm2 / AWG 10-8

Protection category: IP44

Weight: 3 kg

Dimensions: 390 x 300 x 150 mm