Victron BlueSmart IP22 smart battery charger 24V 16A (3)

Victron BlueSmart IP22 charger 24 V/ 16 A

The BlueSmart IP22 is a professional battery charger with unrivaled efficiency, low power consumption and built-in Bluetooth technology, allowing you to display information from your charger on a smartphone, tablet or computer. The Blue Smart IP22 charger can also be used to charge motor vehicle and marine batteries.

Bluetooth

You can set up, view the status or configure the charger via your smartphone. Using the VictronConnect application, which can be downloaded for free on Google Play or the App Store, you can control the charger's functions. The default voltage and current value is displayed on the screen. This application is not yet available for mobile phones with the Windows operating system.

High efficiency

With an efficiency of up to 94%, this charger generates up to four times less heat compared to the industry standard. Once the battery is fully charged, power consumption drops to 0.5W (5-10x less than the industry standard).

Adaptive 6-stage charging algorithm (test - bulk - absorption - reconditioning - float - storage)

The charger is equipped with a microprocessor controlled "adaptive" Battery Management. The adaptive function automatically optimizes the charging process.

Storage mode (less maintenance and aging when the battery is not in use)

Storage mode - if the battery has not been discharged for 24 hours. In storage mode, the voltage is reduced to 2.2V per cell (13.2V for 12V batteries) to minimize gassing and corrosion of the positive plate. Once a week, the voltage is increased to the absorption level to "equalize" the battery. This function prevents electrolyte stratification and sulfation.

Charging Li-ion batteries

Li-ion batteries are charged in a bulk - absorption - float algorithm.

NIGHT and LOW mode

When setting the night or LOW mode, the output current is reduced to max. 50% of the rated power and the charger is completely silent. NIGHT mode ends automatically after 8 hours and LOW mode can be ended manually.

Overheating protection

The output current is reduced if the temperature rises above +50 °C to prevent damage to the charger.

Efficiency: up to 94%

Input voltage (AC): 180-265 V (45-65 Hz)

Charging current: 16 A

Absorption charging voltage: 28.4 V

Float charging voltage: 27.0 V

Storage mode voltage: 27.0 V

No-load power consumption: 0.5 W

Charging algorithm: adaptive 6-stage

Number of outputs (batteries being charged): 3

Charging current in night and LOW mode: 8 A

Protections

• output polarity reversal
• output short circuit
• overheating

Battery output: terminal block without cables

230 V AC input to the charger: 1.5 m cable with classic plug

Protection degree: IP22 (aluminum housing)

Plug type: CEE 7/7 (Schuko)

Weight: 1.3 kg

Dimensions: 235 x 108 x 65 mm