Victron Battery Disconnect 275A

Victron Battery Disconnect 275A

Battery disconnector Battery Switch ON/OFF used to disconnect the plus terminal of the battery from the DC system. The button is removable for safety reasons or to add insulation. The disconnector complies with ISO8846 (flame protection) and is suitable for use in industrial environments.

• Suitable for battery systems up to 48 V
• Detachable button
• Diameter of screws/clamps: 9.53 mm
• Mounting type: surface or back panel mounting
• Standards: ISO8846 and SAE J1171
• Material (bolts and nuts): plated copper
• Base material: nylon reinforced with glass fibers

Max. permanent/continuous current: 27

Max. current 1 min: 455 A

Max. starting current: 1250 A

Nominal voltage: up to 48 V

Dimensions: 76.3 x 69.5 x 69.5 mm

Weight: 0.2 kg

1. The battery switch is used to disconnect the alternator from the starter battery. Used to maintain battery charge, system maintenance, or in an emergency.
2. The battery switch is used to connect the home battery to the starter battery in parallel. It is used in an emergency, for example when the starter is dead or the house battery is dead.
3. The battery switch is used to disconnect the home system from the home battery. Used to maintain battery charge, system maintenance or in case of emergency.
4. The battery switch is used to disconnect the inverter from the home battery. Used to maintain battery charge, system maintenance or in case of emergency.