Ubiquiti UniFi UPS Tower UPS backup power supply 1kVA 600W NUT protocol 10x C13

Ubiquiti UniFi UPS Tower — network backup power supply

For professionals looking for reliable protection of their network infrastructure, this backup power supply is the ideal solution. It offers 1000 VA/600 W power with line-interactive topology and simulated sine wave output, ensuring stable power supply even during power outages. 10 C13 outlet sockets allow flexible device connection, with 5 of them providing full battery protection, while the remaining 5 protect against surges. Thanks to network management over Ethernet with support for the NUT protocol, the device is ideal for centralized monitoring and management within the UniFi ecosystem.

Performance and efficiency

This backup power supply offers automatic switching between power modes in a typical 6 ms, minimizing interruptions. The 12 V/9 Ah battery is hot-swappable, ensuring continuous protection of connected devices without the need to turn them off. Full load runtime is 2 minutes and up to 7 minutes at half load, providing enough time to safely shut down operations or start a backup generator.

Management and Connectivity

The device is equipped with an Ethernet management port and supports the NUT protocol, allowing for remote monitoring and configuration via the UniFi Network app. Two Gigabit ports are available to protect network communications from surges. The ability to set automatic alerts and actions increases the level of security and allows for quick response to potential problems.

Reliable protection and compatibility

The UPS protects against power outages, overvoltages and undervoltages, and automatically disconnects in case of overload to prevent damage to connected devices. It is compatible with more than 50 Ubiquiti products, including routers, switches and access points, ensuring seamless integration into your existing network. Support for the standard NUT protocol extends compatibility to third-party devices.

Technical data

• Power: 1000 VA/600 W
• Topology: line-interactive, simulated sine wave
• Input voltage: 170-280 V AC, nominal 230 V AC
• Output voltage: 220-240 V AC
• Battery: lead-acid 12 V/9 Ah, hot-swappable, capacity 108 Wh
• Charging time: 6-8 hours to 90% capacity
• Operating time: 2 minutes at full load, 7 minutes at 300 W
• Outputs: 10× C13 (5× battery protection, 5× surge protection)
• Network interface: 1× Ethernet 10/100 Mbps, 2× gigabit ports
• Switching time: typically 6 ms, max. 10 ms
• Dimensions: 288 × 280.5 × 99 mm
• Weight: 7.85 kg
• Operating temperature: 0 to +40 °C
• Certification: CE, IEC 62040-1, IP20
• Compatibility: more than 50 UniFi devices (e.g. UDM-Pro, UDR, USW-Enterprise-24-PoE, UNVR-Pro)

The Ubiquiti UniFi UPS Tower is a reliable choice for protecting and managing network devices in environments where stability, security and flexibility are a priority.