TP-Link POE260S 25 Gigabit PoE Injector 802.3af at 30W

TP-Link POE260S

Powerful 2.5G PoE+ Injector for Powering Network Devices via Ethernet Cable

TP-Link TL-POE260S is a professional PoE+ injector fully compliant with IEEE 802.3af/at standards, which allows simultaneous data transmission and power supply over a single Ethernet cable. With support for speeds of up to 2.5 Gbps on both ports, it is an ideal solution for powering high-speed devices such as 2.5G access points, HD IP cameras or IP phones in places where a power outlet is not available.

The injector automatically detects the connected PoE device and delivers exactly the power it needs, up to 30 W. Thanks to its compact dimensions and the ability to be mounted on a wall or placed on a table, it can be easily integrated into any network infrastructure.

• Two 2.5Gbps ports ensure high-speed data transmission.
• Fully compliant with IEEE 802.3af/at standards for powering PoE devices.
• Provides up to 30W of power to connected devices.
• Reduces infrastructure costs by simultaneously transmitting data and power over a single cable.
• Automatically detects and delivers exactly the power the connected device needs.
• Wall-mountable or table-top for flexible installation.
• Plug & Play installation requires no configuration.
• Integrated power supply eliminates the need for an external adapter.

Universal solution for powering network devices

The TL-POE260S PoE+ injector allows you to extend your network to locations without access to a power outlet. It is ideal for powering devices such as 2.5G access points, HD IP cameras, or IP phones.

Support for various network media

The device supports a wide range of network cables including UTP category 3, 4, 5 for 10BASE-T, category 5, 5e for 100BASE-TX, category 5, 5e, 6 for 1000BASE-T and category 5e or higher for 2.5GBASE-T with a maximum length of 100 meters.

Easy to install and use

Thanks to Plug & Play technology, the injector does not require any configuration. Just connect it between the data source (e.g. switch) and the powered device using Ethernet cables and everything is ready to use.

Supported Standards

• IEEE 802.3i
• 802.3u
• 802.3ab
• 802.3bz
• 802.3af
• 802.3at

Ports

• 1× 10/100/1000/2500 Mbps RJ45 data-in port
• 1× 10/100/1000/2500 Mbps RJ45 power+data-out port
• 1× AC power connector

Network media: 10BASE-T to 2.5GBASE-T with support for UTP category 3 to 6 cables (max. 100 m)

Power

• input AC 100-240 V
• 50/60 Hz
• output max. 30 W

LED indication

• ON - normal power
• OFF - no power

Dimensions: 125 × 59.4 × 36.8 mm

Operating temperature: 0 to +40 °C

Certifications

• FCC
• CE
• RoHS