Teltonika Router RUTX10

Teltonics RUTX10

A powerful and reliable industrial router with Wi-Fi that supports the 802.11ac standard. The router works in dual band 2.4 and 5 GHz and is equipped with a Bluetooth LE (low energy) module. It is an ideal solution for applications in small offices or in the public sector that require high-speed data transfer and low latency.

RUTX10 is ideal for data transmission in automation projects based on e.g. SCADA systems, IoT, automated heating/cooling systems and electric vehicle charging stations and more

Advantages

• Wave-2 802.11ac Dual-Band Wi-Fi with a speed of up to 867 Mbps
• Bluetooth LE for short-range communication
• Remote access - Teltonika Remote Management System
• Quad-core ARM Cortex A7 CPU, 717 MHz
• Easy-to-use, secure RutOS operating system based on OpenWrt
• Support for VPN services
• Wide range of supply voltages for easier integration

Wireless part

• Wireless mode: IEEE 802.11ac (Wi-Fi 5), Dual Band, MU-MIMO, transmission up to 867 Mbps, AP and Station
• Encryption: WPA2-Enterprise-PEAP, WPA2-PSK, WPA-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation
• ESSID (stealth mode) + wireless Hotspot

Ethernet part

• 1 x WAN port 10/100/1000 Mb/s, can be configured on LAN (auto MDI/MDIX)
• 3 x LAN port 10/100/1000 Mb/s (auto MDI/MDIX)

Network part

• Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP)
• Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, MQTT, Wake On Lan (WOL)
• VoIP passthrough support: H.323 and SIP-alg protocol NAT helpers (enable correct routing of VoIP packets).
• Connection monitoring: Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP
• Firewall: defines rules for communication (port routing, traffic rules, etc.)
• DHCP: static and dynamic IP allocation
• Network backup: backup with recovery in case of connection or power failure (VRRP)
• QoS: control by priority, source/destination (planned), protocol, port or service (planned), WMM, 802.11e
• DDNS: support >25 service providers, others can be configured manually
• Hotspot: internal/external Radius server, customizable landing page

Security

• Authentication: Pre-shared key, digital certificates, X.509 certificates
• Firewall: Predefined firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
• Attack prevention: DDOS attack prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan protection (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
• VLAN: Separation of ports and VLAN tags
• WEB filter: blacklist for blocking unwanted websites, whitelist for specifying allowed websites
• Access control: Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

• OpenVPN: support for multiple clients on the server, 12 encryption methods
• OpenVPN encryption: DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES- 128-CBC, AES-192-CBC, AES-256-CBC
• IPsec: IKEv1 and IKEv2 with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)
• GRE: GRE Tunnel (General Encapsulation Protocol)
• PPTP, L2TP: client/server services can be started simultaneously
• Stunnel (planned): Encrypted network tunnel, mainly for programs that do not support SSL. It enables the connection of two networks through an encrypted TCP tunnel, or to secure the operation of unencrypted protocols or daemons such as IMAP, MySQL, POP, IRC and others. Adds TLS encryption functionality to existing clients/servers without any code changes.
• DMVPN: Creating scalable IPsec VPN networks

Power supply

• 4pin DC, 9-50V
• passive PoE, incompatible with 802.3af/at
• consumption less than 11 W

Processor

• ARM Cortex A7
• 717 MHz
• 4 cores

Memory: 256 MB DDR3 + 256 MB SPI flash

Standard: IEEE 802.11ac

Data transfer speed: up to 867 Mbps

Ports

• 4 x RJ-45
• 1 x USB 2.0
• 2 x RP-SMA (Wi-Fi)
• 1 x RP-SMA (Bluetooth)
• 1 x digital input
• 1 x digital output (on the power connector)

PoE support

• yes
• passive

Power supply: 9 - 50 V

Dimensions: 115 x 95 x 32 mm