PremiumCord 4K@30Hz HDMI extender up to 60m over one Cat6 6a 7 cable local HDMI output

PremiumCord 4K HDMI extender

Professional HDMI extender enabling transmission of 4K signal up to 40 meters or Full HD 1080p signal up to 60 meters via a single network cable

This powerful extender from PremiumCord is the ideal solution for transmitting HDMI signal over long distances in installations where it is not possible or practical to run an HDMI cable. The device uses standard Cat6/6a/7 network cable and offers a transfer speed of up to 10.2 Gbps including HDCP support for secure content transmission.

The extender is equipped with local HDMI output on the transmitter unit, which allows you to connect a monitor or TV directly to the signal source and simultaneously transmit the image to a remote display device. It also supports HDR 10 for improved dynamic range of the image and EDID pass-through for automatic configuration of the optimal resolution.

• 4K (30 Hz) signal transmission up to 40 meters over a single network cable
• Full HD 1080p signal transmission up to 60 meters
• Local HDMI output on the transmitter unit for connecting a monitor at the source
• High transfer rate of 10.2 Gbps with HDCP support for secure transmission
• HDR 10 support for improved dynamic range and better image quality
• EDID pass-through for automatic configuration of the optimal resolution
• Integrated IR transmission for remote control of connected devices
• POC power supply - only the transmitter unit needs to be powered
• Practical RESET button and LED connection status indication on both units

Easy to install and use

The extender consists of a transmitter and receiver unit, which are connected via a single Cat6/6a/7 network cable. For optimal performance over longer distances, we recommend using a high-quality copper cable with AWG23 conductors, ideally UTP Cat6. Installation is simple - just connect the signal source to the transmitter, the display device to the receiver and connect both units with a network cable.

Integrated IR transmission

The extender includes an IR signal transmission function, which allows you to control the source device with a remote control from the place where the receiver and display device are located. Simply connect the included IR transmitters and receivers to the appropriate connectors on the extender units.

POC power for maximum convenience

The extender uses POC (Power Over Cable) technology, which allows you to power both units from a single source. Simply connect the power adapter to the transmitter unit and the receiver is powered via the connecting network cable, which greatly simplifies installation in places with limited access to the electrical network.

Maximum transmission distance

• 40 m for 4K
• 60 m for Full HD 1080p

Transmitter inputs

• 1× HDMI
• 1× IR
• 1× power input (DC 5 V)

Transmitter outputs

• 1× local HDMI
• 1× RJ-45

Receiver inputs: 1× RJ-45

Receiver outputs

• 1× HDMI
• 1× IR

Supported resolutions

• 480i
• 480p
• 720i
• 720p
• 1080i
• 1080p
• 4K

Baud rate: 10.2 Gbps

Supported technologies

• HDCP
• HDR 10
• EDID pass-through

Connection cable: 1× Cat6/6a/7 (UTP Cat6 with AWG23 wires recommended)

Power

• POC (Power Over Cable)
• only need to power the transmitter

Package Contents

• Transmitter Unit
• Receiver Unit
• 2× IR Cable
• Power Adapter
• Manual