Planet XGS-6320-8X8TR L3 managed switch 8x10Gb 4x10Gb SFP+ QoS NMS 2x power-in RING

PLANET XGS-6311-8T4XR

High-end managed multi-port 10Gb/s switch with L3/L2 switching and security features

The XGS-6311-8T4XR is a fully managed 10Gb/s Ethernet switch designed to meet high-bandwidth requirements (Wi-Fi 6/6E wireless access points, NAS, workstations, 10Gb/s devices, etc.). It is equipped with eight 10G Base-T ports and four 10G Base-X SFP+ slots for optical modules. Redundant power supply system, IP routing on 3. layer, IPv4 supports RIPv2 and OSPFv2 + IPv6 OSPFv3, hardware static routing IPv4/IPv6, routing by VLAN, Spanning Tree protocol, link aggregation, QoS functions, multicast, security (802.1x, TACACS+, RADIUS, VLAN, ACL etc.), ERPS ring (ITU-T G.8032).

A distribution backbone switch for application in the most demanding data infrastructures, which has advanced network algorithms and security functions. It is intended for deployment in data centers, corporate companies, metropolitan networks etc. Full throughput guarantees effective availability of the network or network resources for traffic conducted or controlled through it. The switch is an L3 router with support for RIP and OSFP protocols, has an advanced ACL (Access Control List) filter that allows you to control traffic based on MAC or IP address detection, TCP/UDP protocol, IP priority from traffic passing through the switch, and can set up authentication of physical ports using the IEEE 802.1x RADIUS mechanism.

Ports

• 4× 10G Base-X SFP+

• 8× 10G Base-T RJ-45

• 1× RJ-45 (serial RS-232) console port

Memory

• 32K MAC addresses

• 16 MB buffer

Throughput

• 240 Gbps bus

• operational 178.56 Mpps

Transmission support: JumboFrame 12KB

Design: 1U rack

Power

• redundant

• internal AC 100-240 V (50/60 Hz) power supply

• power consumption up to 56 W

Operating temperature: 0 to +50 °C

Dimensions: 441.5 × 207.5 × 44 mm

Weight: 2.831 kg

Management

• Console
• Telnet
• Web
• SNMP v1/v2c/v3
• SSH v2
• TLS v1.2

IP routing protocols

• RIPv1/v2
• OSPFv2
• BGP4
• IPv4/IPv6 hardware static routing

ACL filter and bonding

• IP ACL, filtering traffic by IP address, protocol, port, TCP flags
• MAC ACL, filtering traffic by MAC address, VLAN ID and combinations of priority flags

QoS traffic prioritization

• 8-level priority for switching
• traffic classification based on IEEE 802.1p CoS/ToS
• IPv4/IPv6 DSCP and WRR

VLAN support

• 802.1Q
• 802.1ad Q-in-Q (VLAN stacking)
• Private VLAN Edge (PVE)
• Protocol-based VLAN
• MAC-based VLAN
• IP subnet VLAN
• GVRP
• Multicast VLAN Register (MVR) up to 4000 VLAN groups

Spanning Tree Protocol

• STP protocol, IEEE 802.1d Spanning Tree protocol
• RSTP protocol, IEEE 802.1w Rapid Spanning Tree protocol
• MSTP protocol, IEEE 802.1s Multiple Spanning Tree protocol

Port mirroring

• RX
• TX
• both

Link aggregation

• IEEE 802.3ad LACP
• supports 64 trunk groups with 8 ports per trunk group

IP Multicast

• IGMP v1/v2/v3
• supports IPv4 querier mode
• up to 1024

Authentication of connected devices

• IEEE 802.1x
• RADIUS
• TACACS+

DHCP Snooping: yes (blocking foreign DHCP servers)

LLDP: yes (automatic detection of the type of connected devices)

Cabling diagnostics

• yes
• SFP-DDM (Digital Diagnostic Monitor)