Planet ISW-511T Industrial Switch 4x 10 100M + 1x 100 MM SC -40~+75°C 48VDC DIN

PLANET ISW-511T

5-port switch and converter for industrial applications. 4 ports 10/100Base-TX, 1 optical port 100Base-FX, SC connectors, multimode, 1300nm, range 2km. Possibility of redundant power supply in the range of 12-48V DC, protection IP30, aluminum case, extended working temperature -40~75°C. Mounting on a DIN rail or directly on the wall.

Switches for industrial Ethernet are intended for demanding operating conditions with a large range of working temperatures, uncertain power supply and frequent shocks. The switches of the ISW series are easily installed on a standard DIN rail or directly on the wall and enable the deployment of the well-known Ethernet technology even in an industrial environment. They are also suitable for installation in outdoor cabinets with large fluctuations in operating temperatures (typically wireless and MAN ISP applications).

Ports

• 4 x RJ-45 10/100Base-TX
• 1 x 100Base-F

Memory

• 2k MAC addresses
• buffer 1 Mb

Throughput

• 1 Gbps bus
• operational 0.74 Mpps (64B)

Execution

• DIN rail
• on the wall

Power supply

• 12-48V DC redundant
• connection possible from two different sources (not included in the package)
• total power consumption up to 13.7W

Protection

• ESD up to 6KV DC
• EFT up to 6KV DC
• protection against polarity reversal
• power supply connection on the terminal board
• location on the bottom panel (does not interfere with wall mounting)

Operating temperature: -40 to 75°C

Dimensions: 135 x 97 x 32 mm

Weight: 436 g

Industrial properties

• the device is resistant to falling (IEC-60068-2-32) from a height of 75 cm on all impact parts
• the device is resistant to vibrations (IEC-60068-2-6)
• the device is resistant to overload short-term acceleration 50g, long-term 4g, (IEC-60068-2-27)
• electrical safety according to CE EN-60950

EMC Electronic compatibility (EMI)

• ČSN EN 55032:2015+AC 2016 - Electromagnetic compatibility of multimedia devices

EMC Immunity Requirements (EMS)

• ČSN EN 55024 A1:2015 - Information technology equipment
• ČSN EN 55035:2017 - Electromagnetic compatibility of multimedia devices
• ČSN EN 61000-4-2:2008 - Electrostatic discharge ESD
• ČSN EN 61000-4-3 A2:2010 - Radiated high-frequency electromagnetic field
• ČSN EN 61000-4-4:2012 - Fast electrical transients/groups of EFT impulses
• ČSN EN 61000-4-5:2014 - Shock impulse and overvoltage
• ČSN EN 61000-4-6:2013 - Resistance to interference propagated by conduction, induced by high-frequency fields
• ČSN EN 61000-4-8:2009 - Magnetic field of mains frequency
• ČSN EN 61000-4-11:2004 - Short-term voltage drops, short interruptions and slow voltage changes