Planet ISW-504PT Industrial Switch 5x RJ-45 VLAN + Extend -40~+75°C PoE+ 802.3af at 120W 12-48VDC power-in

PLANET ISW-504PT v3

Industrial PoE+ switch (802.3af/at), 4x RJ-45 10/100 Base-TX port with PoE+ injectors (up to 36 W/port), 1x RJ-45 10/100 Base-TX (without PoE), total power 120 W (at DC 48 V power supply).

Unmanaged, 802.1Q VLAN and CSMA/CD protocol support, Flow Control (802.3x pause frame for full duplex, Back pressure for half duplex), redundant DC 12-48 V power supply, protection IP40, metal case, working temperature -40 to +75 °C, fanless (without fans), LED indication of PoE usage, DIP switch (Standard/VLAN/Extend), alarm output (power failure), overvoltage ESD protection up to 5 kV, mounting on a DIN rail or directly on the wall, upgraded version v3.

Version v3: increase of PoE output to 36 W/port (802.3at), max. 120 W PoE budget, protection IP30 to IP40, increase of power supply range to 12-48 V, added DIP switch (Standard/VLAN/Extend modes), option side mounting

Switches for industrial Ethernet are designed for demanding operating conditions with a large range of working temperatures, uncertain power supply and frequent shocks. Extended temperature range version of the series switches. The switches of the ISW series are easily installed on a standard DIN rail or directly on the wall and enable the deployment of the well-known Ethernet technology even in an industrial environment. They are also suitable for installation in outdoor cabinets with large fluctuations in operating temperatures (typically wireless and MAN ISP applications). As a PoE switch, it allows up to 4 end devices to be directly powered according to the IEEE 802.3af/at standard, making it an ideal element for applications with a reduced power supply for end devices!

Switch has a manual mode switch

• Standard - switch powers the device at a distance of max. 100 m.
• VLAN - ports are logically separated from each other, in this mode unwanted multicast and broadcast storms can be avoided.
• Extend - switch powers the device up to 250 m with a reduced throughput of 10 Mb/s per port (power supply support up to 25 W)

Physical properties

Ports: 5x RJ-45 port 10/100 Base-T

Memory

• 1K MAC addresses
• JumboFrame 1.5 KB

Throughput

• 1 Gbps bus
• operational 0.74 Mpps (64 B)

Execution

• DIN rail
• on the wall

Power supply

• DC 12-48 V
• redundant
• own power consumption up to 3.7 W (max. 136.8 W at full PoE load)
• connection possible from two different sources (not included in the package)

Protection

• ESD up to 5 kV DC
• protection against polarity reversal

Operating temperature

• -40 to +75 °C
• humidity up to 95%

Dimensions: 135 x 85.1 x 50 mm

Weight: 596 g

Total power output

• max. 120 W (depending on power supply)
• IEEE 802.3at/afaf
• 120 W at DC 48 V power supply
• 90 W at DC 24 V power supply
• 60 W at DC 12 V power supply

Number of injectors: 4x to 36 W

Power type: End-span

• protection (circuit) against interference between ports
• automatic detection of powered equipment
• Extended mode 10 Mb/s with a range of up to 250 m

Industrial properties

• the device is resistant to falling (IEC-60068-2-32) from a height of 75 cm on all impact parts
• the device is resistant to vibrations (IEC-60068-2-6)
• the device is resistant to overload short-term acceleration 50g, long-term 4g, (IEC-60068-2-27)