Planet IGT-1205AT converter 1x 1000Base-T 2x SFP 100 1000Base-X -40 to +75C EFT+ESD

PLANET IGT-1205AT

1000Base-T to 100/1000Base-X Ethernet converter with SPF slots for installation of MFB and MGB modules, designed for industrial and FTTH applications. Redundant power supply in the range of 24V to 48V DC or 24V AC, IP30 protection, aluminum housing, extended operating temperature -40~75°C. ESD+EFT protection up to 6kV DC. DIN rail or wall mounting.

Industrial Ethernet devices are designed for demanding operating conditions with a wide range of operating temperatures, unstable power supply and frequent shocks. The converter is easily installed on a standard DIN rail or directly on the wall and allows the deployment of well-known Ethernet technology even in industrial environments. It is also suitable for installation in outdoor cabinets with large fluctuations in operating temperatures (typically wireless and MAN ISP applications of the FTTH type).

Ports

• 1 x RJ-45 10/100/1000Base-T
• 1 x SFP 1000Base-SX/LX/BX

Transmission support: JumboFrame 9K

Design

• DIN rail
• wall-mounted

OAM support: no

Power

• AC 24V or DC 12-48V
• connection possible from two different sources (not included in the package)
• total power consumption up to 4.8W

Protection

• ESD up to 6KV DC
• EFT up to 6KV DC
• reverse polarity protection
• power connection on the terminal block
• location on the bottom panel (does not interfere with wall mounting)

Operating temperature: -40 to 75°C

Dimensions: 135 x 87 x 32mm

Weight: 505 g

Chassis mountable: no

Industrial properties

• the device is drop resistant (IEC-60068-2-32) from a height of 75 cm on all impact parts
• the device is vibration resistant (IEC-60068-2-6)
• the device is overload resistant to short-term acceleration 50g, long-term 4g, (IEC-60068-2-27)
• electrical safety according to CE EN-60950

EMC Electronic compatibility (EMI)

• ČSN EN 55032:2015+AC 2016 - Electromagnetic compatibility of multimedia equipment

EMC immunity requirements (EMS)

• ČSN EN 55024 A1:2015 - Information technology equipment
• ČSN EN 55035:2017 - Electromagnetic compatibility of multimedia equipment
• ČSN EN 61000-4-2:2008 - Electrostatic discharge ESD
• ČSN EN 61000-4-3 A2:2010 - Radiated radio-frequency electromagnetic fields
• ČSN EN 61000-4-4:2012 - Electrical fast transients/bursts
• ČSN EN 61000-4-5:2014 - Surge and overvoltage
• ČSN EN 61000-4-6:2013 - Immunity to conducted disturbances induced by radio-frequency fields
• ČSN EN 61000-4-8:2009 - Power frequency magnetic fields
• ČSN EN 61000-4-11:2004 - Voltage dips, short interruptions and slow voltage changes

DIN rail mounting:

Wall mounting using the supplied frame: