Planet IFGS-1022HPT industrial PoE switch 8x100Mb + 2x1Gb SFP PoE 802.3at 30 240W -40 to 75°C dual 48-54VDC IP30

PLANET IFGS-1022HPT

Industrial switch and converter with PoE 8 injectors 100Base-TX with total power <240W, 2x SFP slots combined with 2x RJ-45 100/1000Base-X. DIP switches for activation of Extend PoE mode 10Mb/s. Possibility of redundant power supply DC 48~56V, protection IP30, aluminum case, working temperature -40 to +75°C. Overvoltage protection of LAN and power ports up to 6kV. Mounting on a DIN rail or directly on the wall.

Switches for industrial Ethernet are intended for demanding operating conditions with a large range of working temperatures, uncertain power supply and frequent shocks. Extended temperature range version of the series switches. The switches of the IGS series are easily installed on a standard DIN rail or directly on the wall and enable the deployment of the well-known Ethernet technology even in an industrial environment. They are also suitable for installation in outdoor cabinets with large fluctuations in operating temperatures (typically wireless and MAN ISP applications). As a PoE switch, it enables direct powering of up to 8 terminal devices according to the IEEE 802.3at standard, making it an ideal element for applications with reduced power supply thanks to the Extend PoE mode, supplemented by the possibility of powering remote IP devices such as IP cameras at a distance of up to 250m at a speed of 10Mb/s .

Ports

• 8 x RJ-45 10/100BASE-TX
• 2 x RJ-45 10/100/1000BASE-T
• 2 x SFP 1000BASE-SX/LX-B

Memory

• 16k MAC addresses
• buffer 512 B

Throughput

• 5.6 Gbps bus
• operational 4.1 Mpps (64B)

Transmission Support: JumboFrame 10K

IP protocol version

• IPv4
• IPv6

Execution

• DIN rail
• on the wall

Power supply

• redundant source DC 48-56V
• minimum 51V required for full use of PoE+
• total power up to 241W (source not included in the package)

Protection

• ESD up to 6kV
• protection against polarity reversal
• power supply connection on the terminal board
• location on the bottom panel (does not interfere with wall mounting)

Operating temperature

• -40°C - 75°C
• humidity up to 95%

Dimensions: 161 x 107 x 72 mm

Weight: 1034g

Total power output

• 240 W
• IEEE 802.3af
• IEEE 802.3a

Number of injectors: 8 x up to 30 W

Power type: End-span

Advanced functions: Extended mode 10Mb/s with a range of up to 250m

Industrial properties

• the device is resistant to falling (IEC-60068-2-32) from a height of 75 cm on all impact parts
• the device is resistant to vibrations (IEC-60068-2-6)
• the device is resistant to overload short-term acceleration 50g, long-term 4g, (IEC-60068-2-27)
• electrical safety according to CE EN-60950

EMC Electronic compatibility (EMI)

• ČSN EN 55032:2015+AC 2016 - Electromagnetic compatibility of multimedia devices

EMC Immunity Requirements (EMS)

• ČSN EN 55024 A1:2015 - Information technology equipment
• ČSN EN 55035:2017 - Electromagnetic compatibility of multimedia devices
• ČSN EN 61000-4-2:2008 - Electrostatic discharge ESD
• ČSN EN 61000-4-3 A2:2010 - Radiated high-frequency electromagnetic field
• ČSN EN 61000-4-4:2012 - Fast electrical transients/groups of EFT impulses
• ČSN EN 61000-4-5:2014 - Shock impulse and overvoltage
• ČSN EN 61000-4-6:2013 - Resistance to interference propagated by conduction, induced by high-frequency fields
• ČSN EN 61000-4-8:2009 - Magnetic field of mains frequency
• ČSN EN 61000-4-11:2004 - Short-term voltage drops, short interruptions and slow voltage changes