DEEPCOOL case CL6600 ATX dual chamber 360 ARGB AIO 2x120mm ARGB fan 2xUSB3 USB-C black

DEEPCOOL CL6600 — modular case with ARGB cooling

For demanding computer builders looking for efficient cooling and a clean design look, the DEEPCOOL CL6600 case offers the ideal solution. Thanks to the modular division of chambers (HyperSplit), the radiator is physically separated from other components, ensuring separate airflow and eliminating mutual thermal interference. The built-in 360mm ARGB water cooler with a 2,500-3,400 RPM pump and three 120mm fans provides top-notch heat dissipation. This case also impresses with a side panel with USB-C port and elegant wooden accents on the front panel.

Cooling and heat dissipation

The DEEPCOOL CL6600 case is equipped with an aluminum radiator measuring 402 × 120 × 27 mm, which is connected to 250 mm long hoses. This makes the main chamber clear and easy to access. The radiator fans operate in the 500-2,500 RPM range with a maximum airflow of 73.41 CFM, ensuring effective cooling even under high loads. Two 120mm ARGB fans with reverse blades are pre-installed at the bottom of the case, which bring in fresh air and contribute to better airflow.

Space for components and cabling

Thanks to the support of graphics cards with a length of up to 413 mm (or 388 mm when installing the front fan) and CPU air coolers up to 175 mm high, the case is also suitable for powerful builds. For disk installation, 2 + 1 bays for 3.5'' disks and 1 + 1 bay for 2.5'' disks are available. With 35mm space behind the motherboard, Velcro and cable covers, cable management is simple and efficient.

Compatibility and Connectivity

The case supports ATX, Micro-ATX and Mini-ITX motherboards, including rear-mounted variants. The side panel features 2× USB 3.0, 1× USB-C and a combined audio/microphone port. For optimal connectivity, the fans and pump are equipped with addressable RGB LEDs (3pin +5V-D-G), which allows synchronization with compatible motherboards.

Technical data

• Case dimensions: 533.5 × 457.5 × 235 mm
• Weight: 11.82 kg
• Materials: ABS, SPCC, tempered glass
• Pre-installed cooler - pump: 118 × 80 × 76 mm, 2,500-3,400 rpm ±10%, 4pin PWM
• Radiator fans: 3× 120 mm, 500-2,500 rpm ±10%, 73.41 CFM, ≤35.63 dB(A), FDB bearings
• Fan support: top 3× 120mm / 2× 140mm, rear 1× 120mm / 1× 140mm, bottom 2× 120mm (pre-installed)
• Power supply: ATX PS2 up to 160 mm long, also compatible with SFX and SFX-L

This case combines powerful cooling, flexible installation options and elegant design — the ideal choice for power users and gaming enthusiasts.