Ubiquiti UniFi Access Gate Hub Hub 4x PoE Out 2x Dry output 1x 12V output 1x AUX 5x input 1x PoE++ In

Ubiquiti UniFi Access Gate Hub

The UniFi Access Door Hub is a single-gate intelligent IP controller that is part of the UniFi Access solution. It allows seamless control of gate access via connected access readers or intercom. It meets CE, FCC, IC, UL 294, and CAN/ULC-60839-11-1 (Class 1) certifications.

Entry and Exit Control

Supports connection of up to four UniFi Access readers or UniFi Protect devices (camera or doorbell).

Peripheral Connections

2 Gate Drive Terminals: Dry

1 Side Door Lock Relay Output: 12V

1 AUX Output: for Siren

5 Additional Inputs: for Sensors and Buttons

Power and Connectivity

PoE++ with maximum power consumption of 50W (22W without PoE outputs)

Integrated PoE pass-through port (4 PoE outputs, total 28W)

Safety and Certifications

UL 294 (Level I for Destructive Attack, Line Security, Endurance and Standby Power) Certifications: CE, FCC, IC, UL 294, CAN/ULC-60839-11-1

Easy Installation and Operation

Compact dimensions and lightweight polycarbonate construction. Reset button for quick factory reset.

Mounting: DIN

Interface

• 1× reset button
• 1× gate open request input
• 1× gate position input
• 1× side door open request input
• 1× side door position input
• 1× emergency input
• 5× 10/100/1000 Mbps RJ-45 (4× PoE output for readers and cameras)
• 2× output relay for gate controller (potential-free contact)
• 1× AUX output relay for external siren connection 1× output relay for side door lock (powered by 12 V) Power supply: PoE++ 802.3bt, max. power consumption 50 W

Operating temperature: -30 to +60 °C

Weight: 460 g

Dimensions: 175 × 126 × 26 mm

PoE cabling requirements

Category 5e cable is the minimum recommended performance category. The performance category used should match the transmission speed required at the installation site. The minimum wire size allowed for the connection between the PSE or power injector and the PD must be 26 AWG (0.13 mm2) for patch cables; 24 AWG (0.21 mm2) for horizontal or riser cables.