Planet VC-232G VDSL2 converter BNC(coax) 1000Base-T master slave profile 30a G.993.5 Vectoring G.INP

PLANET VC-232G

Ethernet over coaxial line (VDSL2 technology). 1x LAN RJ-45, 1x VDSL2 BNC (coaxial). Transparent bridge. G.993.2 VDSL2, G.993.5 G.Vectoring + G.INP. Power supply DC 5 V/ 2 A (source is included in the package). Capacity 200/100 Mbps at 200 m. Range up to 1.4 km. Setting DIP switches, optional Master (CO) / Slave (CPE).

LRE (Long Reach Ethernet) Ethernet converter to VDSL2 (Very-high-data-rate Digital Subscriber Line 2) Ethernet converter allows data to be transmitted via coaxial line up to 200 Mbit/s over 200 m or 30 Mbit/s up to 1.4 km , transmission speeds according to the condition and quality of the coaxial cable used. You can use the original coaxial distributions, including antenna ones. The device is universal as a master (CO) / slave (CPE) unit, mode setting with a switch. The unit supports VDSL2 operating modes according to transmission profiles "17a" and "30a", selection according to "band Plan997" and G.993.5 G.Vectoring & G.INP affecting symmetrical data transmission at higher speed even on parallel lines.

Ports

1x 10/100Base-TX, RJ-45 1x VDSL, BNC connector, range 1.4 km Transfer support: up to 9kB (JumboFrame)

Compliant with standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3p Transparent for: IEEE 802.1Q VLAN tag

Standard

• ITU-T: G.993.1 - VDSL
• G.997.1
• G.993.2 - VDSL2 (profiles 17a/30a)
• G.993.5 G. - Vectoring and G.INP
• G.998

DIP switching

• choice of CPE/CO
• choice of modulation
• choice of communication limit
• SNR selection

Power supply

• from an external adapter
• 5 V/2 A (source is included in the package)

Operating temperature

• 0 to 50 °C
• humidity <90%

Dimensions: 97 x 70 x 26 mm

Weight: 185 g

Can be installed in chassis

• MC-700
• MC-1500R
• MC-1500

Example of ranges and speeds (down/up Mb/s) on lines with RG6 wires and better

• ?200m ->95Mbps/200Mbps
• ?400m ->82Mbps/175Mbps
• ?600m ->59Mbps/151Mbps
• ?800m ->37Mbps/122Mbps