Planet IGS-4215-4P4T industrial L2 switch 8x1Gb 4x PoE 802.3af 140W 48-54VDC -40~75°C IP30

PLANET IGS-4215-4P4T

Industrial managed PoE switch 8x 10/100/1000Base-T, including 4x PoE IEEE 802.3af injectors, power up to 140W. Support IPv4/IPv6, Web/SNMPv3 management, VLAN 802.1Q, Spanning Tree, Rapid Spanning Tree, 802.3ad LACP line aggregation, Port shaper, QoS, DHCP snooping, LLDP, IGMPv3. Alarm output in case of failure, ESD protection, IP30 protection, aluminum housing, operating temperature -40~75°C. DIN rail or wall mounting.

IGS series switches are easy to install on a standard DIN rail or wall mounting and enable the deployment of well-known Ethernet technology even in industrial environments. They are also suitable for installation in outdoor cabinets with large fluctuations in operating temperatures (typically wireless and MAN ISP applications). As a PoE switch, it allows direct power supply to up to 4 end devices according to the IEEE 802.3at standard, making it an ideal element for applications with reduced power supply options.

Ports

• 8 x RJ-45 10/100/1000BASE-T
• 1 x RJ-45 console port

Memory

• 8k MAC addresses
• 4Mb buffer

Throughput

• 16Gbps bus
• operational 11.9 Mpps (64B)

Transmission support: JumboFrame 10K

IP protocol version

• IPv4
• IPv6

Design

• DIN rail
• wall-mounted

Power supply

• DC 48~56V redundant - connection possible from two different sources (not included in the package)
• power consumption up to 148 W

Protection

• ESD up to 6kV
• reverse polarity protection
• power connection on the terminal block
• location on the bottom panel (does not interfere with wall mounting)

Operating temperature

• -40°C - 75°C
• humidity up to 95%

Dimensions: 161 x 107 x 72 mm

Weight: 1001 g

Management

• console
• Telnet
• Web
• SNMP v1
• v2c
• v3

Access control

• ACL protocol based on IP and MAC
• 256 rules

L3 static routing

• 32 rules
• 8 VLAN interfaces

ACL filter and bonding

• IP ACL, traffic filtering by IP address, protocol, port, TCP flags
• MAC ACL, traffic filtering by MAC address, by VLAN ID and combinations of priority flags

QoS traffic prioritization

• 8 levels
• traffic prioritization by port
• DSCP/ToS in IP packet
• ​​802.1p or 802.1Q tags

Port shaper settings in the range of 500Kbps - 1000Mbps

VLAN support

• IEEE 802.1Q
• up to 255 VLAN groups, up to 4095 VLAN IDs
• Q-in-Q tunneling
• Protocol VLAN
• Private VLAN (PVE)
• Protocol-based VLAN
• Voice VLAN
• Management VLAN

Spanning Tree Protocol

• STP protocol, IEEE 802.1d Spanning Tree protocol
• RSTP protocol, IEEE 802.1w Rapid Spanning Tree protocol
• MSTP protocol, IEEE 802.1s Multiple Spanning Tree protocol

Port mirroring

• RX
• TX
• both

Link aggregation

• IEEE 802.3ad LACP
• 8 ports in 10 groups

Multicast IGMP

• IGMP v1/ v2/ v3
• up to 256 groups
• support for IGMP querier mode

Authentication of connected devices

• IEEE 802.1x (RADIUS) - IP+MAC binding
• VLAN + MAC binding
• 256 rules

DHCP Snooping: yes (blocking foreign DHCP servers)

LLDP: yes (automatic detection of the type of connected devices)

Cabling diagnostics

• yes
• determines the length of the cabling and the possible distance to the fault

POE function

Total power supply power

• 140 W
• IEEE 802.3af
• IEEE 802.3at

Number of injectors: 4 x up to 30 W

Power supply type: End-span

Advanced functions: integrated scheduler for planned shutdown of powered end elements

Industrial properties

• the device is resistant to falling (IEC-60068-2-32) from a height 75 cm on all impact parts
• the device is resistant to vibration (IEC-60068-2-6)
• the device is resistant to overload short-term acceleration 50g, long-term 4g, (IEC-60068-2-27)
• electrical safety according to CE EN-60950

EMC Electronic compatibility (EMI)

• ČSN EN 55032:2015+AC 2016 - Electromagnetic compatibility of multimedia equipment

EMC immunity requirements (EMS)

• ČSN EN 55024 A1:2015 - Information technology equipment
• ČSN EN 55035:2017 - Electromagnetic compatibility of multimedia equipment
• ČSN EN 61000-4-2:2008 - Electrostatic discharge ESD
• ČSN EN 61000-4-3 A2:2010 - Radiated high-frequency electromagnetic fields
• EN 61000-4-4:2012 - Electrical fast transients/bursts
• EN 61000-4-5:2014 - Surge and overvoltage
• EN 61000-4-6:2013 - Immunity to conducted disturbances induced by radio-frequency fields
• EN 61000-4-8:2009 - Power frequency magnetic fields
• EN 61000-4-11:2004 - Voltage dips, short interruptions and slow voltage changes