Planet IGS-1820TF Industrial Switch 16x1Gb 2xSFP dual 12-48VDC 24VAC -40~+75°C fanless

PLANET IGS-1820TF

Industrial switch and converter 16x 10/100/1000Base-T, 2x SFP 1000Base-SX/LX/BX. Energy efficient according to 802.3az. Dual power supply in the range of DC 12-48 V/ AC 24 V, IP30 protection, aluminum housing, operating temperature -40 °C to +75 °C. ESD surge protection up to 6kV. DIN rail or wall mounting.

Industrial Ethernet switches are designed for demanding operating conditions with a wide range of operating temperatures, unstable power supply and frequent shocks. IGS series switches are easily installed on a standard DIN rail or directly on the wall and enable the deployment of well-known Ethernet technology even in industrial environments. They are also suitable for installation in outdoor cabinets with large operating temperature fluctuations (typically wireless and MAN ISP applications).

Ports

• 16 x RJ-45 10/100/1000BASE-T
• 2 x SFP 1000BASE-SX/LX/BX

Memory: 8k MAC addresses

Throughput

• 36 Gbps bus
• operational 26.79 Mpps (64B)

Transmission support: JumboFrame 10KB

Design

• DIN rail
• wall-mounted

Power supply

• 12-48 V DC dual with 24 V AC
• total power consumption up to max. 15 W (power supply not included)

Protection: ESD up to 6KV DC

Operating temperature: -40 to 75 °C

Dimensions: 152 x 107 x 66 mm

Weight: 745 g

Industrial properties

• the device is resistant to falling (IEC-60068-2-32) from a height of 75 cm on all impact parts
• the device is resistant to vibrations (IEC-60068-2-6)
• the device is resistant to overload short-term acceleration 50g, long-term 4g, (IEC-60068-2-27)
• electrical safety according to CE EN-60950

EMC Electronic compatibility (EMI)

ČSN EN 55032:2015+AC 2016 - Electromagnetic compatibility of multimedia equipment

EMC immunity requirements (EMS)

• ČSN EN 55024 A1:2015 - Information technology equipment
• ČSN EN 55035:2017 - Electromagnetic compatibility of multimedia equipment
• ČSN EN 61000-4-2:2008 - Electrostatic discharge ESD
• EN 61000-4-3 A2:2010 - Radiated high-frequency electromagnetic fields
• EN 61000-4-4:2012 - Electrical fast transients/bursts
• EN 61000-4-5:2014 - Surge and overvoltage
• EN 61000-4-6:2013 - Immunity to conducted disturbances induced by high-frequency fields
• EN 61000-4-8:2009 - Power frequency magnetic fields
• EN 61000-4-11:2004 - Voltage dips, short interruptions and slow voltage changes

DIN rail mounting:

Wall mounting using the supplied frame: