Eastron SDM630MCT-MBUS MID 1 5A input Mbus three-phase pulse outputs

Eastron SDM630MCT-MBUS MID

Intelligent electricity meter for 1-phase and 3-phase measurement. The measured parameters include voltage (V), frequency (Hz), current (A), power (kW/kVA/kVAr), import, export and total energy (kWh/kVArh). The device can also measure maximum current and power consumption. It is also equipped with pulse outputs for measuring consumed energy, which allows easy monitoring and recording of data by external devices. This device measures and displays the characteristics of single-phase two-wire (1p2w), three-phase three-wire (3p3w) and three-phase four-wire (3p4w) current in the network.

The electricity meter meets the strict European standards and requirements of the Directive 2014/32/EU for Measuring Instruments (MID), which guarantees its accuracy and reliability.

Displayed parameters

• Voltage between phases and zero (V)
• Phase current (A)
• Total harmonic distortion of voltage (U%THD)
• Total harmonic distortion of current (I%THD)
• Frequency (Hz)
• Power factor (PF)
• Maximum current consumption (MD A)
• Maximum power consumption (MD kW)
• Active power (kW)
• Reactive power (kVAr)
• Apparent power (kVA)
• Import active energy (kWh)
• Export active energy (kWh)
• Total active energy (kWh)
• Imported reactive consumption (kVArh)
• Exported reactive consumption (kVArh)
• Total reactive consumption (kVArh)

A M-bus communication interface is available.

Rated voltage: 3× 230/400 V AC

Voltage operating range: 80-120% of rated voltage (Un)

Input current (rated): 1/5 A

Interface: M-bus

Mounting: DIN rail

Dimensions: 94.5 × 72 × 65 mm

Protection: IP51