ARCTIC P14 Pro PST fan 140mm white

ARCTIC P14 Pro PST - let it blow nicely in the case (in that PC)

ARCTIC P14 Pro PST fan, which cools the PC case, and also lights up a colorful disco. This fan is ready to spin it up, when your PC setup needs it. It reaches speeds in the range of 400-2500 rpm thanks to PWM control and if the operating load is really low, it stops completely. But when your computer slowly starts to sweat, it can drive air at high speed and pressure to ensure the necessary cooling inside the case.

FDB bearing supports long-lasting and quiet operation. It can withstand not only demanding work, but also numerous virtual battles. Other advantages of the ARCTIC P14 Pro PST fan include Daisy-chain cabling, which allows you to easily connect multiple fans without creating a confusing cable mess. This creates a clean and elegant design that is a pleasure to look at.

Advanced 140mm PWM fan with fluid dynamic bearing for effective cooling of computer systems

The ARCTIC P14 Pro PST fan is an advanced solution for cooling cases and radiators with dimensions of 140 × 140 × 27 mm. Thanks to PWM regulation in the range of 400-2500 rpm, it provides an optimal balance between performance and noise level. The special FDB bearing ensures long service life and quiet operation.

The fan is equipped with a practical daisy-chain cable with a length of 400 mm + 80 mm, which allows easy connection of multiple fans in series. The design meets RoHS requirements and is designed for operating temperatures from 0 to 40 °C.

• PWM speed control in the range of 400-2500 rpm with the possibility of complete stop below 5% PWM
• High air flow of 110 CFM (186 m³/h) at a static pressure of 5.2 mm H2O
• FDB bearing for long life and quiet operation
• Daisy-chain cable 400 mm + 80 mm for serial connection of multiple fans
• 4-pin PWM connector with additional 4-pin socket
• ​​Low consumption of only 0.35 A at 12 V DC power supply
• Compact dimensions 140 × 140 × 27 mm with a weight of 242 g

Advanced PWM control

The fan supports smooth PWM control with the possibility of complete stop at a signal below 5%. The starting voltage of only 5 V DC allows reliable start-up even at low speeds.

Daisy-chain technology

The integrated daisy-chain cable with 4pin plug + 4pin socket connectors allows multiple fans to be connected in series without the need for additional splitters or cables.

Optimized design

Specially shaped blades and an optimized frame minimize turbulence and ensure maximum efficiency with low vibration and noise.

Dimensions: 140 × 140 × 27 mm

Weight: 242 g

Speed

• 400-2500 rpm (PWM controlled)
• 0 rpm below 5% PWM

Airflow

• 110 CFM
• 186 m³/h

Static pressure: 5.2 mm H2O

Bearing: FDB

Power supply: 12 V DC (starting 5 V DC)

Consumption: 0.35 A

Cable: 400 mm + 80 mm daisy-chain

Connector: 4-pin PWM plug + 4-pin socket