Ubiquiti G5 Flex - camera 4 Mpx resolution 30 fps IR LED IPX4 PoE (without PoE injector)

Ubiquiti UniFi Protect G5 Flex

The UniFi Protect G5 Flex camera provides a clear and sharp image in 2688 × 1512 resolution at 30 fps with night vision. The camera supports active PoE power supply (37-57 V DC). Package does not include PoE injector.

• Compact 2K HD PoE camera (interior & exterior)
• 5 Mpx CMOS sensor (4 Mpx video)
• Angle of engagement: 102.4° horizontal, 54.9° vertical, 120.6° diagonal
• IR illuminator (night mode) with a range of up to 6 m
• AI event detection (artificial intelligence)
• H.264 video compression
• Microphone (can be turned off)
• Protection IPX4 + IK04 (anti-vandal)
• PoE power supply
• Mounting: table (desktop), wall, pole, ceiling (included), cable (sold separately)
• Management through the UniFi Protect application (version 2.2.7 or 2.7.28 and later (Web) / 1.10.0 and later (iOS & Android))

Sensor resolution: 5 Mpx

Sensor chip: 5 Mpx CMOS sensor (4 Mpx video)

Maximum resolution: 2688 × 1512 px

Frame rate: 30 fps max

IR illuminator

• yes
• up to 6 m (20 ft)

Lens: fixed

Interface: 1× RJ-45 10/100 Mbps

Video compression: H.264

Memory card slot: no

Audio

• yes
• integrated microphone

Power supply: PoE 37-57 V DC

Working temperature: -20 to +40 °C

Weight: 170 g

Dimensions: 107.5 x 48 x 48 mm

WDR (Wide Dynamic Range)

The cameras of the G4, G5 and AI series have True WDR technology. Generations G3 and earlier only have digital WDR (DWDR).

• When the software increases the FPS (above the default value), the WDR turns off due to the exposure limit.

Attention

• The camera is not intended for open space. Installation is possible only in a protected environment (for example, in the ceiling, under the roof, etc.). For outdoor installation, Ubiquiti Professional Wall Mounts IPIUBT0003 and IPIUBT0004 can be used, which can be found in related products.