Solarmi DCAC40 fitted switchboard for AC+DC photovoltaics

Xtend Solarmi DCYC40 mounted switchboard

Switchboard DCAC40 (T1+T2), house switchboard, PNS series

AC+DC switchboard intended for wall mounting, IP65 used for servicing a three-phase photovoltaic power plant (typically DEYE/Xtend Solarmi inverters, Goodwe 4 to 10K-ET).

• Meets the standard/requirements according to ČSN EN 61439-3 and ČSN EN 61439-1 edition 2
• Gray ABS distributor, transparent plastic door, rear cover part of the switch cabinet
• Degree of protection IP65 & Mechanical resistance IK08
• Protection class I+II (fully insulated)
• Including N/PE terminal block
• 3 rows, 54 modules, DIN rail
• Rated voltage 415 V AC & Rated insulation voltage 1000 V AC/ 1500 V DC

List of components

• 1× Switchboard ON IP65 plaster, transparent door, 3 rows, 54 modules
• 1× Surge arrester class T1+T2 (B+C), 4-pole set for TN-S
• 1× Main switch, 240 V, 40 A, 3 HP
• 1× Monitoring voltage relay
• 1× Finder RELAY
• 1× Installation contactor, 230 V AC/50 Hz, 4S, 40 A
• 1× Circuit breaker PL6, characteristic B, 3-pole, Icn=6 kA, In=6 A
• 1× Circuit breaker PL6, characteristic B, 3-pole, Icn=6 kA, In=20 A
• 1× Circuit breaker PL6, char B, 1-pole, Icn=6 kA, In=2 A
• 2× Surge arrester T1+T2 (I+II, B+C), photovoltaic applications 1000 V DC, max. short circuit. current 1000 A
• 4× Ultra fast cylindrical fuse for photovoltaics, (UL standard), 10 x 38 mm, 1100V DC, 15 A
• 2× Fuse disconnector, photovoltaic applications, 2-pole, 1000 V AC / 30 A, C10 (10 × 38 mm)

Intended use: for photovoltaics

Employed: yes

Material: plastic

Dimensions: 586 x 418 x 148 mm