Planet ISW-511S15 4x 10 100Base-TX+ 1x 100FX 15km SM DIN IP30

PLANET ISW-511S15

5-port switch and converter for industrial applications. 4 10/100Base-TX ports, 1 100Base-FX optical port, SC connectors, singlemode, range 15km. Redundant power supply in the range of 12-48V DC, IP30 protection, aluminum housing, operating temperature -10~60°C. DIN rail or wall mounting. Industrial Ethernet switches are designed for demanding operating conditions with a wide range of operating temperatures, unstable power supply and frequent shocks. ISW series switches are easily installed on a standard DIN rail or directly on the wall and enable the deployment of well-known Ethernet technology in industrial environments. They are also suitable for installation in outdoor cabinets with large fluctuations in operating temperatures (typically wireless and MAN ISP applications).

Ports

• 4 x RJ-45 10/100Base-TX
• 1 x 100Base-FX

Memory

• 2k MAC addresses
• 1Mb buffer

Throughput

• 1 Gbps bus
• operational 0.74 Mpps

Design

• DIN rail
• wall-mounted

Power

• 12-48V DC redundant
• connection possible from two different sources (not included in the package)
• total power consumption up to 9.1W

Protection

• against reverse polarity
• power connection on the terminal block
• location on the bottom panel (does not interfere with wall mounting)

Operating temperature

• -10°C - 60°C
• humidity up to 90%

Dimensions: 135 x 97 x 32 mm

Weight: 436 g

Industrial properties

• the device is resistant to falling (IEC-60068-2-32) from a height of 75 cm on all impact parts
• the device is resistant to vibration (IEC-60068-2-6)
• the device is resistant to overload short-term acceleration 50g, long-term 4g, (IEC-60068-2-27)
• electrical safety according to CE EN-60950

EMC Electronic compatibility (EMI)

• ČSN EN 55032:2015+AC 2016 - Electromagnetic compatibility of multimedia equipment

EMC immunity requirements (EMS)

• ČSN EN 55024 A1:2015 - Information technology equipment
• ČSN EN 55035:2017 - Electromagnetic compatibility of multimedia equipment
• ČSN EN 61000-4-2:2008 - Electrostatic discharge ESD
• ČSN EN 61000-4-3 A2:2010 - Radiated radio-frequency electromagnetic fields
• ČSN EN 61000-4-4:2012 - Electrical fast transients/bursts EFT
• ČSN EN 61000-4-5:2014 - Surge and overvoltage
• ČSN EN 61000-4-6:2013 - Immunity to conducted disturbances induced by radio-frequency fields
• ČSN EN 61000-4-8:2009 - Power frequency magnetic fields
• ČSN EN 61000-4-11:2004 - Voltage dips, short interruptions and slow voltage changes